Pressure Washing for Travertine is one of the jobs we do most often in Woodbury, NJ. Typical jobs cost $150-$600, and you approve the price before we begin. With travertine, the right approach is low-pressure wash.
Method and pressure
Cleaning solution: A pH-neutral stone cleaner.
Caring for travertine
Travertine is a natural limestone popular around pools. It is porous and soft, so it stains easily and is damaged by acidic cleaners. Gentle cleaning and a breathable sealer keep it looking good.
Avoid: Acidic cleaners (including vinegar) and high pressure, which pit the stone and open its pores.
How often: Clean yearly; reseal every 2-3 years.
Is it time for pressure washing for travertine?
- Driveway or walkways look dark, gray or streaky
- Green or black growth in shaded areas and along edges
- Slippery surfaces after rain
- Oil, rust or tire marks you can't scrub out
- You're getting ready to sell, seal or paint
Why it gets dirty
- Dirt and pollen that settle into the pores of concrete
- Mold, mildew and algae in damp, shaded spots
- Oil and fluid drips from vehicles
- Rust from sprinklers, furniture and fertilizer
- Tire marks and general foot traffic
What you can do yourself
- Sweep off leaves and loose debris so they don't stain
- Blot fresh oil drips with cat litter or an absorbent right away
- Point sprinklers away from walls and walkways to cut down on rust and hard-water stains
- Rinse pollen off with a garden hose during heavy pollen season
Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.
What can go wrong with DIY pressure washing
- Etched lines and 'zebra stripes' from holding a narrow tip too close
- Water forced into window frames, door sills and siding laps
- Damaged plants and lawns from chemical runoff
- Injuries: a zero-degree tip can cut skin, and wet surfaces are slippery
Our process for pressure washing for travertine
- Walk the property and note surfaces, stains and anything fragile
- Protect plants, outlets, lights and doors, and move small items
- Pre-treat organic growth and degrease oil spots
- Clean with the right pressure and a surface cleaner for even results
- Rinse, post-treat to slow regrowth, and walk the job with you
How much does pressure washing for travertine cost?
What moves the price:
- Size: square footage of siding, roof or flatwork
- Condition: heavy growth, old stains and peeling finishes take longer
- Access: number of stories, roof pitch, slopes and how close we can park
- Add-ons: sealing, gutter brightening and other services done in the same trip
These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.
Other services for travertine
- Patio Cleaning for Travertine
- Pool Deck Cleaning for Travertine
- Paver Cleaning & Sealing for Travertine
Pressure Washing for Travertine in Woodbury, NJ
In New Jersey, concrete has to deal with summer mildew and winter salt and freeze-thaw cycles. Annual cleaning and a sealer every few years help it last.
Crews serve all of Woodbury (ZIP codes 08086, 08093 and 08097), plus Woodbury Heights (1.5 mi), National Park (2.4 mi), Oak Valley (2.6 mi) and Wenonah (3 mi). Call (555) 010-0000 for a free quote in Woodbury.
Pressure Washing for Travertine: frequently asked questions
How much does pressure washing for travertine cost in Woodbury, NJ?
Pressure Washing for Travertine typically costs $150-$600 for a typical home's driveway, walkways and patio, and usually takes 1-4 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.
Do you use high pressure for pressure washing for travertine?
For travertine: usually under 1,500 PSI with a wide tip. What we avoid: acidic cleaners (including vinegar) and high pressure, which pit the stone and open its pores. The cleaning solution does most of the work, followed by a gentle rinse.
Is pressure washing for travertine safe for my plants and pets?
We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.
How often should I schedule pressure washing for travertine?
Clean yearly; reseal every 2-3 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.
What if it rains on the day?
Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.